HSN CODE: 32089029
SC HR TI 1200 S/B is a solvent-based thermal insulation coating designed for high-temperature environments up to 1200°C. It provides excellent resistance to heat, oxidation, and thermal cycling. The coating forms a durable insulating barrier that reduces heat loss and enhances process efficiency. It is suitable for both internal and external applications in furnaces, kilns, and industrial equipment. Its solvent-based formulation ensures strong adhesion and fast curing. All products are Green Products and are manufactured under ISO 9001:2015 and ISO 14001:2015 standards, ensuring quality, reliability, and environmentally responsible production.
SC HRTI 1200 is ideally suited for high-temperature environments and industrial equipment requiring exceptional heat resistance and thermal protection.
Its inert silicone matrix makes it suitable for direct metal application without the need for primer under high-temperature exposure.
Surface Preparation:
Ensure that the surface is clean, dry, and free from old coatings, grease, or rust.
Remove any previous coatings using SC Paint Stripper, allowing it to lift the old paint before scraping with emery paper.
Clean the surface with thinner to remove any residual contaminants.
Mixing and Thinning:
Stir SC HRTI 1200 thoroughly before application.
Thin the material using SC Thinner for Heat Resistant Paints if necessary to achieve the desired application viscosity.
Application Process:
Apply the first coat using a brush, roller, or spray gun.
Allow the coat to air dry for one hour, then cure at 250°C for one hour.
Apply the second and third coats in the same manner, each followed by curing at 250°C.
After the final coat, allow the surface to cool to ambient temperature.
Final Heating Cycle:
During the first operational heating, raise the temperature gradually at a rate of 100°C per hour.
Some fumes may be observed during this phase — this is normal and indicates proper curing of the silicone matrix.